Quality cerification
A100-M
A100-M
A200-M
A200-M
A103
A103
Anchor Plate
Anchor Plate
DP-A100
DP-A100
A200-BTA
A200-BTA

Disc Brake Calipers

General Description

A range of hydraulic and mechanical brake calipers and accessories particularly suited to marine use.

Range

Mechanical Caliper Assembly - A100-M Series

  • Ductile castings are hot dipped galvanised.
  • Stainless steel components are used throughout.
  • Teflon coated bushes fitted (no greasing required).
  • Supplied complete with asbestos free pads, slides and mounting bolts.
  • Interchangeable with A200-M hydraulic model.
  • Suits 1/2" and 5/8" disc rotors (also available from Trigg Bros Pty Ltd).

Hydraulic Caliper Assembly - A200-M Series

  • Ductile castings are hot dipped galvanised.
  • Stainless steel components are used for slides and piston.
  • Quality EDM 'O' ring seals.
  • Teflon coated bushes fitted (no greasing required).
  • Supplied complete with asbestos free pads, slides and mounting bolts.
  • Interchangeable with A100-M mechanical model.
  • Suits 1/2" and 5/8" disc rotors (also available from Trigg Bros Pty Ltd).

Centre Pull Mechanical Lever - A103

  • Centre pull mechanical lever to suit A100-M mechanical brake caliper.

Brass Bundy Tube Adaptor - A200-BTA

  • 3/8" UNF Brass bundy tube adaptor to suit A200-M hydraulic brake caliper.

Disc Pads - DP-A100, DP-A200

  • Asbestos free disc pads to suit A-100M and A-200M calipers.

Anchor Plates - AP39, AP40 and AP 45 Series

  • Laser cut from 12 mm plate.
  • 3 1/2" centres tapped with 7/16" UNF thread.
  • Suits A100-M and A200-M calipers.
  • Available to suit axles sizes - 39 mm round, 40 & 45 mm square.
  • Also available to suit Toyota Landcruiser TB501/401 12" disc rotor.

Ordering Information And Replacement Parts

 Description  
Part Number  
Mechanical Caliper  
MARINISED MECHANICAL CALIPER  A100M  
   GALV CALIPER ARM DRILL/TAP NO BOLTS    A101  
   MECHANICAL CALIPER PAD (T PAD)    A102  
   90 DEGREE CENTRE PULL MECH ARM    A103  
   STAINLESS STEEL RETURN SPRING A100M    SPR-100SS  
   M10 x 60 SS AXIS BOLT    M10X60SS  
   NUT-M10SS (M10 ADJUSTING NUT)    NUT-M10SS  
   M10 x 50 SS SET SCREW    M10X50SS  
   NUT-M10NYMS (AXIS NYLOC NUT)    NUT-M10NY  
 Hydraulic Caliper  
 MARINISED HYDRAULIC CALIPER    A200M  
   BUNDEY TUBE ADAPTOR    A200-BTA  
   COMPLETE HYD CYLINDER TO SUIT A200M    A201-PA  
   MACHINED CALIPER PISTON    A202  
   SS BLEED SCREW SUIT A201 CYLINDER    BLEED-A200  
   6 x 16 S/STEEL MOUNT BOLT    BLT-M6X16  
  M6X116X116SPW (SPRING WASHER)  M6X116X116 
  O-RING FOR A200  OR-A200 
Common Parts   
MC-34X112SS (S/S SLIDES)  MC34X112SS 
DB1028 AF DISC PAD (PAIR)  DP-A100 
Anchor Plates   
39MM ROUND ANCHOR PLATE  AP39MM 
40MM SQUARE ANCHOR PLATE  AP40MM 
45MM SQUARE ANCHOR PLATE  AP45MM 
45 MM TO SUIT 12" L/C DISC AP45MM/LC
7/16 x 2 ANCHOR PLATE BOLT  BLT-716UNF 

Contact us

Trigg Bros Pty Ltd cannot accept responsibility for product performance should the product be altered or combined with parts and accessories that are outside of the manufacturer's specification.